channel-list

Configures the channel list advertised to wireless clients

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

channel-list [2.4GHz|5GHz|dynamic]

channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]

Parameters

channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]


channel-list	Configures the channel list advertised to wireless clients
2.4GHz <CHANNEL-LIST>	Configures the channel list advertised by radios operating in 2.4 GHz <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
5GHz <CHANNEL-LIST>	Configures the channel list advertised by radios operating in 5.0 GHz <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
dynamic	Enables dynamic (neighboring access point based) update of configured channel list

Example

nx9500-6C8809(config-device-94-9B-2C-13-3E-1C))#channel-list 2.4GHz 1,2

nx9500-6C8809(config-device-94-9B-2C-13-3E-1C))#show context
ap505 94-9B-2C-13-3E-1C)
 use profile default-ap505
 use rf-domain default
 hostname ap505-133E1C
 area RMZEcospace
 channel-list 2.4GHz 1,2
nx9500-6C8809(config-device-94-9B-2C-13-3E-1C))#

Related Commands


no	Resets the channel list configuration